05 Valves
01 Globe Valves
02 Angle Valves
03 Quick Acting Valves
This valve features an all stainless steel internal component system allowing for the use of various gas applications.
04 Bypass Valves
These valves are designed for use in cylinder filling and bulk liquid pumping applications as a bypass and primer valve for turbine style dispensing pumps as well as vane and side channel type pumps.
05 Check Valves
These valves are designed to prevent liquid discharge when the desired flow is directed into a vessel, thereby allowing the flow in only one direction.
06 Excess Flow Valves
These valves are designed for liquid or vapor fill or withdrawal and for vapor equalization in containers or line applications.
07 Filler Couplings
These couplings are used as connections between the hose and transfer valve.
08 Liquid Transfer Valves
This valve is designed to safely transfer liquid from a container during an emergency or during container
relocation09 Pull Away Coupling
These couplings are designed to provide a safe way to transfer gas without sacrificing flow
10 Strainers
11 Vent Valves
12 Internal Relief Valves
13 Multiport
Designed for use with large LPG and NH3 in stationary storage containers with flanged openings.
14 External Relief Valves
Designed for online pipe installations, to protect piping and shutoff valves from over pressure situations where LPG has the potential to be trapped.
15 Internal Valves
Flanged internal valves, equipped with a built-in excess flow valve to prevent uncontrolled product release, are perfect for mounting a pump or other similar piping connections.
16 Actautors
-
01 Actuator Rotary Cam for 2"& 3"Threaded valve
The actuator is preassembled and ready to install.
-
01 Bypass Valve 3/4"F.NPT V/E 50-150PSI
Intended for use in small cylinder filling applications as a bypass and primer valve for turbine style dispensing pumps.
-
01 Check Valve Steel 3/4"F.NPT x 3/4"M.NPT
Valves are intended to prevent liquid discharge when the desired flow is directed into the vessel thereby allowing the flow in only one direction.
-
01 Filler Coupling Brass 3/4"M.NPT x 1 3/4"F.ACME Liquid
These couplings are used as connections between the hose and transfer valve.
-
01 Internal Valve steel 1 1/4" NPT 72GPM
These valves, designed as primary shut-offs to control product discharge in LP-Gas service.
-
01 Liquid T/F Valve 3/4"M.NPT - 14NGT x 3/4" F.NPT & plug
Designed to provide a safe means by which to transfer liquid from a tank during an emergency or container relocation.
-
01 Multiport 3" Flanged 3 Valves 250PSI LPG & NH3
Designed for use with large LP-Gas and NH3 stationary storage containers with flanged openings.
-
01 Pull away coupling 3/4" F.NPT Lanyard type
Designed to provide a safe way to transfer LP-Gas and NH3 without sacrificing flow.
-
01 Q/A Globe Valve steel 1/2"F.NPT
These dispensing valves provide the user with instant full-on, full-off flow with the added protection of a self-locking handle to prevent accidental opening of the valve
-
01 RV External 1/4" M.NPT Brass 250PSI 17.24Bar
Designed for small containers and online pipe installation, to protect piping and shutoff valves from over pressure situations where LPG has the potential to be trapped
-
01 RV Internal St/steel 2"M.NPT 250PSI
Designed for use in mobile LPG & NH3 containers as a primary pressure relief valve.
-
01 Strainer 1/2" F.NPT LPG / NH3 40 Mesh
Designed for flow in one direction to guard against debris in pipelines that could cause
damage to pumps, valves and other equipment. -
01 Vent valve Brass 1/4" M.NPT
Marshall Excelsior is the only manufacturer in the industry that offers three types of vent valves - Low Emission, Self-Cleaning Low Emission, and Standard Vent Valves.
-
02 Bypass Valve 1"F.NPT V/E 50-150PSI
Intended for use in small cylinder filling applications as a bypass and primer valve for turbine style dispensing pumps.
-
02 Cap plastic 1 1/4" ACME
Cap plastic 1 1/4" ACME
-
02 Check Valve Steel 1 1/4F.NPT x 1 1/4"M.NP
Valves are intended to prevent liquid discharge when the desired flow is directed into the vessel thereby allowing the flow in only one direction.
-
02 Filler Coupling Steel 3/4"M.NPT x 1 3/4"F.ACME Liquid
These couplings are used as connections between the hose and transfer valve.
-
02 Internal Valve steel 2" NPT 225GPM
These valves, designed as primary shut-offs to control product discharge in LP-Gas service.
-
02 Pull away coupling 1 1/4" F.NPT Lanyard type
These couplings are designed to provide a safe way to transfer gas without sacrificing flow.
-
02 Q/A Filler Valve SS/AL 1"F.NPT x 1 3/4"F.ACME
These hose end valves are leading the industry in minimal product loss during disconnect without sacrificing flow.
-
02 RV External 1/4" M.NPT Brass 375PSI 25.8Bar
Designed for small containers and online pipe installation, to protect piping and shutoff valves from over pressure situations where LPG has the potential to be trapped.
-
02 RV Semi internal Brass/St/steel 2"M.NPT 250PSI
Designed for use in large stationary LPG containers as a primary pressure relief valve.
-
02 Strainer 3/4" F.NPT LPG / NH3 40 Mesh
Designed for flow in one direction to guard against debris in pipelines that could cause
damage to pumps, valves and other equipment. -
02 Vent Valve S/ST T Bleeder 1/4" M.NPT
Marshall Excelsior is the only manufacturer in the industry that offers three types of vent valves - Low Emission, Self-Cleaning Low Emission, and Standard Vent Valves.
-
03 Actuator Rotary Cam for 4"Single flange internal valve
The actuator is preassembled and ready to install.
-
03 Bypass Valve 1 1/4"F.NPT 91-125PSI
These bypass valves are specifically designed to protect truck and plant pumps from damage due to excessive pressure. -
03 Check Valve Steel 2"F.NPT x 2"M.NPT
Valves are intended to prevent liquid discharge when the desired flow is directed into the vessel thereby allowing the flow in only one direction.
-
03 Filler Coupling Brass 1"M.NPT x 1 3/4"F.ACME Liquid
These couplings are used as connections between the hose and transfer valve.
-
03 Globe Valve 1 1/4"F.NPT
All stainless steel internal components with rotating seat disc design & V-cup Tefl on® packing stem seals.
-
03 Internal Valve steel 3" NPT 360GPM
These valves, designed as primary shut-offs to control product discharge in LP-Gas service.
-
03 Liquid T/F Valve 3/4"M.NPT x 3/4"F.NPT 28GPM EFV
Designed to provide a safe means by which to transfer liquid from a tank during an emergency or container relocation.
-
03 Q/A Angle Valve steel 1" F.NPT
Dispensing valves are designed to be used at the end of a filling hose on a bobtail, dispensing system or nurse tank filling operations.
-
03 RV External 1/4" M.NPT S/ST 350PSI 24.13Bar
Designed for online pipe installations, to protect piping and shutoff valves from over pressure situations
where LPG has the potential to be trapped. -
03 RV Internal St/steel 3"M.NPT 250PSI
Designed for use in mobile LPG & NH3 containers as a primary pressure relief valve.
-
04 Adapter 3/8"F.NPT 3/4"M.NPT x 1 1/4"M.ACME
Adapter 3/8"F.NPT 3/4"M.NPT x 1 1/4"M.ACME
-
04 Back check valve 1/4" M.NPT to F.NPT
Valves are intended to prevent liquid discharge when the desired flow is directed into the vessel thereby allowing the flow in only one direction.
-
04 Bypass Valve 1 1/2"F.NPT 91-125PSI
These bypass valves are specifically designed to protect truck and plant pumps from damage due to excessive pressure while providing the industry’s best bypass fl ow rates across a full range of set pressures.
-
04 Filler Coupling Steel 1"M.NPT x 1 3/4"F.ACME Liquid
These couplings are used as connections between the hose and transfer valve.
-
04 Globe Valve 1 1/2"F.NPT
All stainless steel internal components with rotating seat disc design & V-cup Tefl on® packing stem seals.
-
04 Internal Valve steel 3" NPT 450GPM
These valves, designed as primary shut-offs to control product discharge in LP-Gas service.
-
04 Multiport 4" Flanged 4 Valves 250PSI LPG & NH3
Designed for use with large LP-Gas and NH3 stationary storage containers with flanged openings.
-
04 RV External 2 1/2"M.NPT 250PSI LPG & NH3
Designed for use with large LP-Gas and NH3 stationary storage containers with flanged openings.
-
04 Strainer 1 1/4" F.NPT LPG / NH3 40 Mesh
Designed for flow in one direction to guard against debris in pipelines that could cause
damage to pumps, valves and other equipment. -
05 Angle Valve 1 1/2"F.NPT
All stainless steel internal components with rotating seat disc design & V-cup Teflon® packing stem seals.
-
05 Bypass Valve 2"F.NPT 91-125PSI
These bypass valves are specifically designed to protect truck and plant pumps from damage due to excessive pressure while providing the industry’s best bypass flow rates across a full range of set pressures.
-
05 Filler Coupling Brass 3/4"M.NPT x 1 3/4"F.ACME Vapour
These couplings are used as connections between the hose and transfer valve.
-
05 Globe valve 1"F.NPT
All stainless steel internal components with rotating seat disc design & V-cup Tefl on® packing stem seals.
-
05 Internal Valves steel 3" Single flange 360GPM
Flanged internal valves, equipped with a built-in excess flow valve to prevent uncontrolled product release.
-
05 Multiport 8 Stud / Nut mounting kit
Multiport 8 Stud, Nut mounting kit.
-
05 RV External 1 1/4" eu30 17.65 Bar
Pressure relief valve with cylindric thread to be used in connection with the lower check valve.
-
05 Strainer 1 1/2" F.NPT LPG / NH3 40 Mesh
Designed for flow in one direction to guard against debris in pipelines that could cause
damage to pumps, valves and other equipment. -
06 Angle Valve 2"F.NPT
All stainless steel internal components with rotating seat disc design & V-cup Teflon® packing stem seals.
-
06 Bonded Seal for 1 1/4" EU30 RV
Bonded seals for external safety valves with cylindrical thread.
-
06 Bypass Valve 3"F.NPT 76-150PSI
These bypass valves are specifically designed to protect truck and plant pumps from damage due to excessive pressure while providing the industry’s best bypass flow rates across a full range of set pressures.
-
06 Filler Coupling Steel 3/4"M.NPT x 1 3/4"F.ACME Vapour
These couplings are used as connections between the hose and transfer valve.
-
06 Globe Valve 2" F.NPT
All stainless steel internal components with rotating seat disc design & V-cup Tefl on® packing stem seals.
-
06 Strainer 2" F.NPT LPG / NH3 40 Mesh
Designed for flow in one direction to guard against debris in pipelines that could cause
damage to pumps, valves and other equipment. -
07 Angle Valve 3"F.NPT
All stainless steel internal components with rotating seat disc design & V-cup Teflon® packing stem seals.
-
07 Filler Coupling Brass 1"M.NPT x 1 3/4"F.ACME Vapour
These couplings are used as connections between the hose and transfer valve.
-
07 Globe Valve 3"F.NPT
All stainless steel internal components with rotating seat disc design & V-cup Tefl on® packing stem seals.
-
07 ST30 Check valve for 1 1/4" relief valves
Safety relief valve with cylindric thread to be used in connection with the lower check valve.
-
07 Strainer 3" F.NPT LPG / NH3 40 Mesh
Designed for flow in one direction to guard against debris in pipelines that could cause
damage to pumps, valves and other equipment. -
08 1 1/4" PRV to 1 1/2" F.NPT Pipe away adapter
Pipe away adapter.
-
08 Combination valve 3/4" M.NPT x 1/4" F.NPT
Developed to mount a pressure gauge and fixed tube liquid level gauge all in one valve.
-
08 Filler Coupling Steel 1"M.NPT x 1 3/4"F.ACME Vapour
These couplings are used as connections between the hose and transfer valve.
-
09 Fill Check brass 1 3/4" M.ACME x 1 3/4"F.ACME short
These adapters are intended to be attached to the LP-Gas delivery truck hose outlets.
-
10 1/4" PRV Installation date plate with 16mm hole
1/4" PRV Installation date plate with 16mm hole
-
10 Europump Bypass Valve 1"F.NPT vapour return
Europump Bypass Valve 1"F.NPT vapour return
-
10 Fill Check AL 1 3/4"M.ACME x 1 3/4"F.ACME 7"long
These adapters are intended to be attached to the LP-Gas delivery truck hose outlets.
-
11 EFV 2" Internal A3500L4 75GPM
These valves are designed for liquid or vapor fill or withdrawal and for vapor equalization in containers or line applications.
-
11 Filler Coupling Al 1"M.NPT 1 3/4"F.ACME Fluted filling
These couplings are used as connections between the hose and transfer valve.
-
12 EFV 2" Internal A3500P4 150GPM
These valves are designed for liquid or vapor fill or withdrawal and for vapor equalization in containers or line applications.
-
12 Swivel EZ Turn S/Steel 1"F.NPT x 1"M.NPT
The E-Z Turn hose end swivel connector allows the hose end valve to rotate 360º.
-
13 EFV 3" Internal A3500V6 250GPM
These valves are designed for liquid or vapor fill or withdrawal and for vapor equalization in containers or line applications.
-
13 Filler Coupling Brass 1 1/4" NPT x 1 3/4" ACME
All Omeca filler valves are of the double back check construction.
-
14 Dumpy 80% stopfill valve 3/4" NPT x 1 3/4" ACME
80% stopfill valve 3/4" NPT x 1 3/4" ACME